COXO DL-300P Intraoral Scanner Package with Laptop and mobile cart

Product Description

24h shipping

For orders placed before 3:00 PM

Free Shipping

For orders over 200 RON

Technical Support

For any order

Model: DL-300P

Manufacturer: Coxo

Warranty: 12 months

Condition: New

- 31.9%

Original price was: 33.17000 lei.Current price is: 22.60000 lei.

Available on backorder

Available on backorder

Product Description

COXO DL-300P Intraoral Scanner Package with Acer V15 Laptop and mobile cart

To download the latest intraoral scanner software click HERE

If you have an older version update your COXO intraoral scanner software now with the version released after March 10 for improved accuracy and optimized stability

To install the latest video card driver download the Nvidia application HERE

We have prepared a folder with fingerprints taken with the COXO DL-300P intraoral scanner. These are available for download and analysis in STL, PLY and OBJ formats, giving you the opportunity to test and better understand the quality and accuracy of this scanner. Access the folder HERE

For detailed instructions on how to install and use the intraoral scanner, please check the section below, where you will find explanatory videos directly from our YouTube channel. They will guide you step by step for an optimal product experience!

 

With the purchase of the package, we offer the installation of Windows with original license and installation of the scanner software, so that your new laptop is immediately ready for work and maximum productivity

⚡ If you don’t have even 10 minutes to watch the video, follow these essential steps:

Start scanning

  1. a) Start scanning from the posterior lingual or palatal side.
  2. b) Then pass occlusal surface and maintain a fluid motion.
  3. c) Vestibular, scan half of the arch from the posterior to the incisors.
  4. d) In the incisor area, stop scanning and move the scanner to the other side in the posterior area and continue to the incisors
  5. e) If scan anomalies occur, insist on the affected and adjacent areas for the software to correct them automatically.

For a correct occlusion scan, it is mandatory to take two separate impressions:

Occlusion 1: Scan posterior side only (left or right, no matter the order) with fluid up-down movements until the scanner beeps.

Occlusion 2: Switch to the other posterior and scan the same way until the beep.

⚠️ Make sure the patient is in centric occlusion and does not move their jaw during the scan!

In total, you’ll have 4 full fingerprints:

✅ Upper jaw

✅ Lower jaw

✅ Occlusion 1 (posterior left or right)

✅ Occlusion 2 (posterior left or right)

Scan check

  • Analyzes the 3D model generated on the screen and checks for under-scanned areas highlighted in light green
  • If there are gaps or the scan is incomplete, go back over the problem areas.

PRODUCT DESCRIPTION:

This intraoral scanner comes equipped with included software with no additional license costs. Users benefit from all necessary functionality without hidden fees, making the user experience simple and efficient, optimized for modern dental practices.

This DL-300P intraoral scanner from COXO is the result of an exceptional collaboration with Launca, a trusted partner in technological innovation. Together, COXO and Launca have succeeded in developing a scanner that delivers top-notch accuracy and performance tailored to today’s clinical needs. This collaboration ensures superior quality and an enhanced experience for dental professionals.

Launca Medical Device Technology Co., Ltd. is a company founded in 2013, specializing in innovative intraoral scanning and dental digitizing solutions. Under the leadership of founder Dr. Jian Lu, an expert with over 13 years of 3D imaging experience, Launca has become a major player in the global dental technology market. The company launched China’s first intraoral scanner in 2015 and has continued to innovate, providing advanced solutions for dentists through dust-free scanners and state-of-the-art technology

The COXO intraoral scanner is an advanced device used in dentistry for capturing detailed digital images of dental structures and the oral cavity. It is recognized for its effectiveness in simplifying the impression process, reducing patient discomfort and increasing clinical efficiency. Equipped with state-of-the-art technology, this scanner produces high-resolution images essential for accurate diagnosis and planning of complex dental treatments. Its compact design and easy maneuverability make it ideal for integration into the digital workflows of modern dental practices, optimizing treatment time and improving the overall patient experience.

BENEFITS:

  • AI mode: In this mode, artificial intelligence recognizes teeth and soft tissues in the scan field and automatically removes soft tissues such as the tongue, lips and oral mucosa.
  • Full jaw and mandibular scanning: Supports various scanning modes including restorative, implant, orthodontic, removable dentures and tooth preparation.
  • Ultra-clear 3D model display: After scanning is complete, true-color 3D models are generated that faithfully reflect intraoral details, supporting high-resolution true-color model output in OBJ format.
  • Integrated occlusion analysis mode:
    • Supports unilateral/bilateral occlusal scanning.
    • 3D chromatographic analysis of occlusal condition.
    • 2D occlusal cross-section measurements.
    • Occlusal data matching analysis.
    • Occlusion reconstruction: two strategies to improve the accuracy of occlusion reconstruction, even when the patient has minor movements during the scanning process.
  • Automatic scan report:
    • Supports the generation of digital reports with a simple click on a QR code or link.
    • Supports preformed high-definition 3D models.
    • Supports 3D report screenshots and 2D endoscopic photos.
    • Supports import of CBCT results and attachment of PNG, JPEG panoramic images. The treatment program is edited in movie format and the oral report is exported.
  • Software support:
    • AI-assisted dental disease detection, visualization and repair reports.
    • Support for report review, electronic signature.
  • Remote control function: Includes a high-precision gyroscope and a one-touch remote control function that allows operations such as “previewing”, changing steps, taking pictures and other actions to reduce typing and avoid touching the mouse, keyboard and other causes of cross-infection.
  • Scan playback function: Supports real-time playback of the scanning process to simplify the training process.
  • Built-in screen capture and video recording function: supports video recording and screen capture via software, aiding clinicians in case sharing; supports 30 frames per second video output.
  • Intelligent scan guidance and learning resource library:
    1. Guided operation function built into the software, supports 30 frames per second video output.
    2. The guided operation function of the software is built in, making it convenient for clinicians to get started quickly according to the guide.
    3. The software includes videos with learning resources, allowing doctors to practice operations synchronously with the video.
    4. Doctors can move the position of the 2D window and adjust the size of the window according to their operating habits.
  • Edge line function: Supports automatic extraction or manual edge line creation from scan data, sent to the design technician and imported directly into the design software for immediate use.
  • Subcavity detection function: Supports subcavity detection in scan data, helping the clinician to prepare teeth for reference.
  • Software feedback system: Supports feedback for scanning problems, remote repair of abnormal cases and scanner status assessment.
  • Cloud transfer feature: supports synchronization of patient data and attachments (photo and CBCT data) with the cloud, packaged and sent with one-touch to cooperating clinicians and email addresses.
  • Cloud platform function:
    • Synchronized management of doctors and patients.
    • Preview patient scan data in ultra-high-definition and true-color 3D models.
    • Supports editing, downloading and sharing digital scan reports.
    • Supports one-touch sending of scan data to the cooperating technical institute.

TECHNICAL SPECIFICATIONS:

Scanner:

  • Scan time per arc: 30 seconds
  • Scanner dimensions: 220 mm x 36 mm x 34 mm
  • Date format: STL, PLY, OBJ
  • Field of vision: 17 mm x 15 mm
  • Tip dimensions: Standard: 20 mm x 17 mm, Medium: 17 mm x 14.5 mm
  • Weight: 180 g
  • Light source: LED
  • Scanning distance: 0~18 mm
  • Local scanning accuracy: 10 μm
  • Scanning Accuracy: Per Tooth ≤ 20 μm, Per Bridge ≤ 45 μm, Full ≤ 60 μm
  • Frames per second: 30 FPS
  • Autoclavable tip: up to 100 cycles
  • Software included

Laptop:

  • Operating system: No operating system installed
  • Processor: Intel Core i9-13900H up to 5.4 GHz
  • RAM: 32GB DDR5
  • Storage: 1TB SSD
  • Graphics card: NVIDIA GeForce RTX 4060 with 8GB dedicated memory
  • Display: 15.6 inch Full HD IPS 144Hz
  • Color: Obsidian Black

The scanner comes bundled with the Acer Nitro V 15 for optimized performance for intraoral scanner use thanks to its powerful Intel Core i9-13900H processor and 32GB RAM, which ensures fast and efficient processing of complex data. Dedicated 8GB NVIDIA GeForce RTX 4060 graphics with 8GB provides the necessary capacity for detailed visualization of 3D images, and the 1TB SSD allows for large data storage without compromising on access speed. These features make the Acer Nitro V 15 a robust choice for advanced medical applications.

The package comes with the metal table for its superior stability. Metal, being sturdy and durable, ensures that the table will not shift or vibrate. Choosing a table of the highest quality guarantees not only long-term reliability, but also compliance with the high standards required in the dental field. This contributes to the efficiency and accuracy of dental procedures.



Guide for sending equipment for repair under warranty/service:

If you are certain that your equipment falls within the conditions and period of the warranty:

  1. You can send it with a description of the defect to the following address:
    DENTAL EQUIPMENT STORE S.R.L., Str. Dafinului, nr.5, Timișoara, Attention: Warranty/Service Department, via Fan Courier.
    You can call DENTEQUIP at the phone numbers 0770 713 820 / 0772 047 330 / 0725 724 858 and request a pick-up of the package from your address, with the transport cost being covered by DENTAL EQUIPMENT STORE S.R.L., mentioning that it is equipment for which you are requesting warranty coverage.
    To avoid any potential issues regarding compensation for damaged packages during transport, we recommend insuring the packages at the value on the purchase invoice. Please ensure the equipment is properly packed.
  2. You can also deliver it in person to the Warranty/Service Department, from Monday to Friday, between 9:30 AM and 6:30 PM.
    You can check whether the product is under warranty and whether support for shipping is available by using the contact form or at the address contact@dentequip.ro.

WARNING: If the warranty claim is unjustified (i.e., the product is functional), the requester will be required to pay the round-trip shipping fees for the products, as well as any diagnostic costs (as determined by the Warranty/Service Department).

THE BUYER CAN REQUEST THE RETURN OF PRODUCTS PURCHASED FROM THE ONLINE STORE DENTEQUIP.RO IN THE FOLLOWING SITUATIONS:

  1. The products do not conform to the specifications on the website.
    In the event that the buyer, upon receiving the package, believes that the product received does not match the specifications on the website, they should contact the Seller to clarify the issues raised, as the product descriptions on the website may be incomplete due to space and/or information structure limitations. If a clear non-conformity with the specifications on the website is found, the Buyer must report the non-conformity within a maximum of 24 hours, and they may opt for a replacement with another product or a full refund of the amount paid.
  2. Incorrect products were delivered by the Seller.
    In the case of receiving the wrong product or an incorrect quantity, the Buyer must notify the Seller within a maximum of 24 hours to resolve the issue. If the product is no longer in stock, the Buyer may opt for a replacement with another product or a full refund of the amount paid.
  3. The products are found to be non-functional within the first 48 hours after receipt (two working days).
    The Buyer can report this issue within a maximum of 48 hours from the date of receipt and can request the return of the product for replacement with a new one. If the product is no longer in stock, the Buyer may opt for a replacement with another product or a full refund of the amount paid.
  4. Consumable products that have been unsealed cannot be returned.
    Regardless of the situation, the product return procedure requires informing the Seller before sending the product, through a message describing the reason for the return, sent to the email address contact@dentequip.ro.

When sending the package, the Buyer may use the following return label template: Form model.

The products must be returned in the condition in which they were received, along with all accessories and documents that were included with the products upon delivery. Returns will be refused if the products are damaged or if the Seller determines that the products are unsellable. Products must be returned via the courier service agreed upon by the Seller, to the address of the work point in Timișoara, Str. Dafinului nr. 5.

The Buyer may opt for a full refund of the amount paid or a replacement with another product.

If a replacement with a more expensive product is agreed upon, the Buyer will pay the price difference; if the replacement product is cheaper, the Buyer will receive a partial refund corresponding to the difference in price.

All return and shipping costs will be borne by the Seller.

In accordance with the new ANMDM regulations, the buyer is required to provide the ANMDM control authorities with the CE Certificates, the Declaration of Conformity for each individual medical device, along with the seller’s approval from where the product was purchased.

Download the documentation here: https://dentequip.ro/documentatie/