International Shipping all over Europe GLS & DHL
0.00 lei 0 items

No products in the cart.

dentequip logo
0.00 lei 0 items

No products in the cart.

Washing machine Lindar 100L Woson

Product information:

Model: Lindar 100L

Producer: Woson

Warranty: 12 months

Condition: new

14,000.00 lei

Credit module tbi bank 3.4.0

737.46 EUR x 24 months

SKU: MSL-100LWOSON Categories: , Tags: ,
service and warranty

Washing machine Lindar 100L Woson

Woson Medical Instrument Co., Ltd was established in 2000, after accumulating over 20 years of experience in the field of processing and servicing dental products. The company is located in Ningbo, a city east of Zhejiang, China. The factory occupies a total area of 14000 sqm, of which 11367 sqm built area, 5 main workshops and 1 office building, and is one of the oldest companies manufacturing dental equipment, accessories and devices.



The Woson Lindar medical washer is mainly used for cleaning medical instruments by microcomputer control. The system is based on the high-pressure circulation water pump effect, multi-directional dynamic spraying can be achieved through the spray arm. The cleaning process is carried out by high temperature thermal washing at930,230C, higher than ordinary medical washing machines. When you run the cleaning procedure and add a low-foaming multi-enzyme agent, it can quickly break down and separate pollutants from the external surface and internal cavity of dental instruments, so that a thorough cleaning is achieved inside and outside dental handpieces.

  • Fully automatic cleaning, simple operation, energy saving and environmental protection.
  • Super capacity, available to clean a variety of instruments at the same time.
  • 5 intelligent washing programmes, meeting different requirements.
  • TFT thermal film double drying technology

NOTE: Run time is based on water temperature of250C, and time is extended or shortened depending on water supply temperature.

⚠️ All machine-cleaned instruments (e.g. dental handpieces) must be resterilised/sterilised after cleaning.



  • Capacity: 100 litres
  • High temperature disinfection;
  • Dimensions: 595 x 550 x 620 mm (L x W x H)
  • Weight: 38 KG
  • Power supply: 220 V 50/60 Hz
  • Allowable water pressure: 0.04-1.00MPa;
  • Operating temperature: +5°C to +40°C
  • Noise level: < 60 DB

Additional information

Weight 38 kg
Dimensions 595 × 550 × 620 cm

Guide to sending equipment for repair under warranty/service:

If you are certain that your equipment falls within the warranty conditions and period:

1. You can send it with a description of the defect to:
DENTAL EQUIPMENT STORE S.R.L., Str. Aries, No. 3, Timișoara, to the attention of the Warranty/Service department, via the Fan Courier courier.
You can call DENTEQUIP on the telephone numbers 0770 713 820/0772 047 330/0725 724 858 and request the collection of the package from your address, the cost of transport being borne by DENTAL EQUPMENT STORE S.R.L, mentioning that it is an equipment for which you are requesting a guarantee.
To avoid possible problems regarding compensation for parcels damaged during transport, we recommend insuring the parcels at the value of the purchase invoice. Please pack the equipment properly.

2. You can hand it in personally to the Service/Warranties Department, from Monday to Friday, between 9:30 a.m. and 6:30 p.m.,
You can check whether or not the product is covered by the warranty and benefits from shipping support, through the contact form or at [email protected].

ATTENTION: If the warranty request is unjustified (functional product), the applicant will pay the round-trip shipping charges for the products and any diagnostic costs (determined by the Service/Warranty Department).

Return of Products


  • The products do not conform to the specifications on the website. In the event that the buyer, at the time of receiving the parcel, considers that the product received does not comply with the specifications on the website, he contacts the Seller in order to clarify the issues raised, since, in accordance with the Terms and Conditions of the website, the description of the products may be incomplete for reasons related to of space and/or information structure. If there is a clear non-conformity with the specifications provided on the website, the Buyer is obliged to report the non-conformity within a maximum of 24 hours, he can opt for the replacement with another product or for the full refund of the amount paid.
  • The products were delivered in error by the Seller. In case of delivery of a different product or in a different quantity, you must report the incident to the Seller within a maximum of 24 hours to resolve the incident. If the product is no longer in stock, the Buyer can opt for replacement with another product or for full reimbursement of the consideration.
  • The products prove to be non-functional within the first 48 hours of their receipt (two working days). The buyer can complain about this within a maximum of 48 hours from the date of receipt and can request the return of the product in order to replace it with a new product. If the product is no longer in stock, the Buyer can opt for a replacement with another product or for a full refund.

Returns of unsealed consumable products are not accepted. Regardless of the situation, the product return procedure involves notifying the Seller before sending the product, through a message describing the reason for the return, sent to the e-mail address [email protected]

When sending the package, the Buyer can use the following return label model: Model form.

The products must be returned in the condition in which they were received, accompanied by all the accessories and documents received when the products were delivered. The return will be refused if the products are damaged or if the Seller finds them to be unsaleable. The products will be returned via the courier service agreed by the Seller, to the address of the work point in Timisoara, Str. Aries No. 3, demisol

The buyer can opt for a full refund or replacement with another product.

If the replacement with a more expensive product is agreed, the Buyer will pay the price difference, respectively if the value of the replacement product will be lower, he will receive the corresponding partial refund.

All return and shipping costs will be borne by the Seller.

© 2023 Dental Equipment Store SRL
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram